注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
高能閥門集團有限公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地溫州市
塑料機械網采購部電話:0571-88918531QQ:2568841715
聯系方式:查看聯系方式
更新時間:2025-03-02 12:59:34瀏覽次數:49次
聯系我時,請告知來自 塑料機械網暫無信息 |
用途User該閥安裝于水泵出口
用途 User The valve is installed in the outlet of the pump. It is used to prevent the backflow of the medium and can be connected with the water pump to prevent water hammer phenomenon. It is applicable to water systems such as industrial and mining enterprises and high-rise buildings. 兩階段關閉防水錘效果好,明顯。The two-phase shut-off hammer has good effect and quiet sound. 原理 Principle 開閥:水泵起動,電磁閥通電打開,主閥上隔膜室的水流入下游。主閥瓣被下腔壓力水推起。 關閥:停泵前,電磁閥斷電,主閥開始關閉,當關閉至10%開度時,行程開關動作,水泵停止。余下10%開度靠介質倒流使主閥瓣關閉。 Open valve: water pump starts, the solenoid valve opens, the water of the diaphragm chamber in the main valve flows downstream. The main disc is pushed by the cavity pressure. Shutoff valve: before stopping the pump, the solenoid valve is off. The main valve begins to close. When it closes to 10%, the stroke switch moves and the pump stops. The remaining 10% opening depends on the flow of the medium to close the main disc. 執行標準 Executive standard 法蘭尺寸 Flange dimensions:GB/T 17241.6 試驗檢驗 Test test:GB/T 13927 安裝圖典型 Installation diagram
該閥安裝于水泵出口。用于防止介質倒流,可與水泵聯動,可有效防止水錘現象產生。適用于工礦企業、高層建筑等水系統。
特點 Characteristic
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
塑料機械網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
高能閥門集團有限公司