注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
四川川大干燥科技工程有限責任公司
四川川大干燥科技工程有限責任公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地成都市
塑料機械網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2023-07-27 09:24:47瀏覽次數：340次
聯系我時，請告知來自 塑料機械網暫無信息 |
一、工作原理與應用范圍介紹IntroductionofWorkingPrincipleandScopeofApplication將物料放入箱體內的加熱管架上的料盤內，然后抽呈真空狀態
將物料放入箱體內的加熱管架上的料盤內，然后抽呈真空狀態。物料在真空狀態下受熱干燥，速率會大大加快，同時也節省了能源。物料在少氧、真空狀態下脫水干燥出來的產品在色、香、味等方面優于有氧熱風干燥。物料中排出的溶劑可通過冷凝器加以回收利用。
方形真空干燥機、圓形真空干燥機適用于狀態不穩定物料以及熱敏性物料的烘干脫水。由于真空箱內部與外界隔絕，干燥過程接觸氧的機會比傳統熱風干燥少，能有效保護物料氧化的破壞作用。非常適用于回收溶劑的物料干燥以及在干燥工程中有排出有毒、有刺激性氣體的物料的干燥與回收處理。屬于靜態干燥，故干燥物料的形體不會損壞。工作時將粉狀、顆粒狀、塊狀、膏糊物料以及濃縮液置于烘盤中進行烘干。該機為分批次間歇干燥生產方式。
The materials to be dried are placed in the tray on the heating pipe frame in the oven, and the oven will be vacuumized. The drying speed under vacuum state will be increased, thus to save energy. The products dehydrated and dried in the mionectic and vacuum state will be better than that dried by hot air as to the color, smell and taste. The solvent discharged by the materials may be recycled by condenser.
The square/round vacuum drier is applicable to the drying and dehydration of unstable and heat-sensitive materials. For the inside of vacuum chamber is isolated from the outside, the opportunity to contact with oxygen during the drying is less than that of traditional hot air drying, effectively protecting the materials from oxidative damage. It is applicable to material drying of recovered solvent, and drying and recycling of material with poisonous and irritating gas discharged during the drying. The shape of materials to be dried will not be damaged for it is static drying. The powder, particle, bulk and paste materials and concentrated solution will be placed in the baking tray for drying. The intermittent drying in batch is adopted by the equipment.
1.適合不耐高溫以及熱敏性物料。
2.物料遇氧容易氧化，有危險的物料。
3.需要回收溶劑和有毒氣體的物料。
4.要求殘留揮發含量極低的物料。
5.對基本不破壞物料外形的物料。
1.It is applicable to material without high temperature resistance or with heat sensibility.
2.It is applicable to materials easy to be oxidized when contacting with oxygen or hazardous materials.
3.It is applicable to materials easy to be oxidized when contacting with oxygen or hazardous materials.
4.It is applicable to materials with very low volatile content in the residue.
5.It is applicable to materials with appearance not be damaged.
1、圓型真空干燥機Round Vacuum Drier
2、方形真空干燥機Square Vacuum Drier
1、圓型真空干燥機Round Vacuum Drier
2、方形真空干燥機Square Vacuum Drier
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
塑料機械網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
