注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
四川川大干燥科技工程有限責任公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地成都市
塑料機械網采購部電話:0571-88918531QQ:2568841715
聯系方式:查看聯系方式
更新時間:2023-07-26 23:37:38瀏覽次數:215次
聯系我時,請告知來自 塑料機械網暫無信息 |
一、工作原理及應用范圍介紹IntroductionofWorkingPrincipleandScopeofApplication二維混料機主要由轉筒、擺動架、機架三大部分構成
一、工作原理及應用范圍介紹Introduction of Working Principle and Scope of Application
二維混料機主要由轉筒、擺動架、機架三大部分構成。轉筒裝在擺動架上,由四個滾輪支撐并由兩個傳動輪對其進行軸向定位。在四個支撐滾輪中,其中兩個傳動輪由轉動動力系統拖動使轉筒產生轉動;擺動架由一組曲柄擺桿機構來驅動讓轉筒作上下運動,曲柄擺桿機構裝在機架上,擺動架由軸承組件支撐機架上。
廣泛運用于:制藥廠的總混機,食品、化工、飼料、粉末冶金等行業大批量混料。
2D mixer is mainly composed of a drum, a swing frame and a rack. The drum is installed on the swing frame, supported by four rollers, and positioned by two driving wheels on the axle direction. Among four supporting rollers, two of them are dragged by rotating power system; the swing frame is drove by one group of crank rocker mechanism to make the drum moving up and down; the crank rocker mechanism is installed on the rack, and swing frame is supported by the bearing assembly on the rack.
It is widely applied in the mixing assembly of pharmaceutical factory, and large batch mixing of food, chemical, feed, and powder metallurgy industries.
二、特點 Characteristics
1.設備結構簡單,占地占空間小,自動出料且出料干凈。
2.容器內可據工藝需要加設抄板,用以強化混料效果。
3.運行平穩,清潔方便。
4.根據工藝需要,可滿足大批量的總混。
1.The equipment is simple in structure, small in floor area, automatic and clean in discharge.
2.The shoveling plate may be set in the container as per the process requirement to strength the mixing efficiency.
3.It is stable in operation and convenient for clean.
4.It can meet the total mixing of large batches as required by the process.
三、外形簡圖Dimension sketch
四、技術參數(下表中數值僅供選型時參考)
Technical parameters (the values in the table below are for reference in type selection only)
二維混合機
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
張家港激光設備組裝,啟東激光刻碼機配件專業維修 生產激光打標機廠家
GTPC-50D 面議塑料機械網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
四川川大干燥科技工程有限責任公司