注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
上海楓岳商貿有限公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地上海市
塑料機械網采購部電話:0571-88918531QQ:2568841715
聯系方式:查看聯系方式
更新時間:2023-01-22 08:21:44瀏覽次數:325次
聯系我時,請告知來自 塑料機械網暫無信息 |
VITEK®2CompactisidealforBiopharmacompanieswhichroutinelyperformmicrobialidentification
VITEK® 2 Compact is ideal for Biopharma companies which routinely perform microbial identification. The automated system guarantees excellence and optimizes your workflow.
With its extended database, VITEK® 2 Compact enables to identify a large range of microorganisms
Optimized workflow : all stages are automated, from reading to the recording of results
Full traceability : the risk of transcription errors is minimized
– Bar-coded cards
– 21 CFR Part 11 Compliant
Productivity
– Reduced time to result : from 2 to 18 hours
– Intuitive software : technicians require less training
VITEK® 2 Compact 系統的高效性取決于其*的比色技術:該系統每隔 15 分鐘在三種不同波長下讀取一次新一代 VITEK 測試卡(具有 64 個孔以確保準確性),測得相關數據。采用該技術可以分析更多的反應項目,提升結果的準確性。
全自動化操作,可提高實驗效率和安全性
當日或次日即可得出結果
的準確度,為您帶來可靠的結果
符合 BAM 及 ISO 7218 標準
符合 21 CFR Part 11 標準
通過 AOAC OMA 驗證(特指 BCL、GP 和 GN 試卡)
全面的測試菜單
可滿足用戶自行建庫的補充反應文件
直觀的系統和軟件
試卡均條碼標記,檢測過程全程溯源
Dimensions:
Height 60 cm (23.6 in.)
Width 72 cm (28.3 in.)
Depth 68 cm (26.8 in.)
Mass:
Approximately 75 kg (165 Lb)
Electrical Characteristics:
Input voltage:100/120/220/240 VAC at 50/60 Hz
Maximum input current: 5 amps @ 120 VAC or 2.5 amps @ 240 VAC
Nominal input current: 2.5 amps @ 120 VAC or 1.25 amps @ 240 VA
Power : 300 watts nominal, 600 watts peak
Heat: 1025 BTU/HR (nominal)
Power cord: Detachable 3-wire with ground, per IEC 320
General Characteristics:
Cassette: Capacity, cards: 10 cards per cassette
Vacuum (Filler): Minimum level: 0.89 PSIA ±0.06 PSIA
Sealer: Mechanical: stub length 1.25 ± .25 mm
Incubator: Temperature: 35.5 °C ± 1 °C average
Capacity: 30 or 60 cards per Incubator (depending on configuration)
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
塑料機械網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
上傳附件
請選擇省份
聯系方式
上海楓岳商貿有限公司
上傳附件