塑料機械網
詳細介紹
| 項目 | Item | 單位 | ZSQ 230 | ||||||
| 項目 | Item | 單位 | 主注射系統 | 副注射系統 | |||||
| 注射裝置 | INJECTION UNIT | A | B | C | A | B | C | ||
| 螺桿直徑 | Screw diameter | mm | 45 | 50 | 55 | 26 | 30 | 32 | |
| 螺桿長徑比 | Screw L/D ratior | L/D | 23.3 | 21 | 19.1 | 25.4 | 22 | 20.6 | |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 397 | 490 | 593 | 69 | 92 | 104 | |
| 注射重量 | Injection weight(ps) | g | 362 | 446 | 540 | 62.8 | 83 | 95 | |
| 注射速率 | Injection rate | g/s | 124 | 154 | 186 | 55 | 73 | 83 | |
| 注射壓力 | Injection pressure | Mpa | 207 | 168 | 138 | 227 | 170 | 150 | |
| 螺桿轉速 | Screw speed | rpm | 155 | 185 | |||||
| 鎖模裝置 | CLAMPING UNIT | ||||||||
| 鎖模力 | Clamping force | kN | 2300 | ||||||
| 移模行程 | Open stroke | mm | 475 | ||||||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 520×520 | ||||||
| 模厚 | Max.Mold height | mm | 530 | ||||||
| 最小模厚 | Min.Mold height | mm | 200 | ||||||
| 頂出行程 | Ejector stroke | mm | 140 | ||||||
| 頂出力 | Ejector stroke | kN | 70 | ||||||
| 其他 | OTHERS | ||||||||
| 油泵壓力 | Max Pump pressure | kW | 16 | 16 | |||||
| 油泵電機功率 | Pump motor power | kW | 18.5 | 7.5 | |||||
| 電熱功率 | Heating power | kW | 14.8 | 6.3 | |||||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 5.68×3.13×2.14 | ||||||
| 油箱容積 | Olitank cubage | L | 300 | ||||||
| 機器重量 | Machine weight | t | 7 | ||||||
未找到相應參數組，請于后臺屬性模板中添加
在常規機上可配置不同規格的平面轉盤,可根據客戶需求定制。
Equipped rotary platen with different specifications on the standard machine according to customer’s needs.
造模簡易，成本低，生產快捷。
Simplify mold design enabling reduction in production cost and lead time.
安裝在共塑注塑機上，接上機器提供的液壓動力及控制線路，轉盤可作180°往復旋轉。
The platen can be rotated 180° to and fro when it installed on co-injection machine with turning on hydraulic power and control circuit.
內置兩組運水流道，在盤面上提供運水喉咀。
Two units of water channels with water outlet installed on the platen surface.
暫未實現,敬請期待
暫未實現,敬請期待
塑料機械網