我公司銷售的材料均為*材料，咨詢采購！ 吳生 186 6517 6937

TPE PELPRENE S2004FS日本東洋紡供應相關介紹如下：

Processing of PELPRENE

PELPRENE can be processed through injection molding, extrusion or blow molding using Basic type of molding machines. Also, it can be processed through heating press, melt casting or rotational molding.

PELPRENE molding products are easily treated with finishing touches including coating, printing, vapor deposition, spattering, and heat adhesion.

The pellets of PELPRENE are usually packed into moisture-proof bags after they were dried. Thus they can be processed directly, but for any moisturized pellets due to broken bags or not new ones, please use them after re-drying.

As a guide for drying, the pellets should stay for 4 hours or more in temperatures of 100°C – 120°C.

處理PELPRENE
PELPRENE可以通過注塑加工、擠壓或吹塑成型機的使用基本類型。也可以通過加熱處理出版社,熔化鑄造、旋轉成型。
PELPRENE成型產品很容易接受收尾工作包括涂料、印刷、氣相沉積、飛濺、熱粘合。
PELPRENE通常擠進的球團防潮袋后曬干。因此他們可以直接處理,但對于任何滋潤顆粒由于破袋或不是新的,re-drying后請使用它們。
指南干燥,顆粒應該停留4個小時以上在溫度為100°C - 120°C。