注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
東莞市恒隆塑膠有限公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地杭州市
塑料機械網采購部電話:0571-88918531QQ:2568841715
聯系方式:查看聯系方式
更新時間:2018-05-15 17:31:59瀏覽次數:237次
聯系我時,請告知來自 塑料機械網產品名稱:POM 德國巴斯夫N2320 0035 所在地區:德國 產品報
價:1/KG
POM 德國巴斯夫N2320 0035-詳細說明:
聚甲醛塑料,俗稱賽鋼,為結晶性熱可塑性塑料,具明顯熔點165~175℃,性質zui接近金屬。
產品說明 | |
Rapidly solidifying standard grade for injection molding. Abbreviated designation according to ISO 1043: POM Designation according to ISO 9988-1: POM-K, M-GNR, 03-002 Ultraform® is supplied in the form of granules having a bulk density of approx. 850 g/l. Standards packs are the 25 kg PE bag and the 1000 kg Oktabin (octagonal container). Ultraform® is not subject to change when it is stored in dry, ventilated rooms. After relatively long storage (>1 year) or when handling material from previously opened containers, preliminary drying is recommended in order to remove any moisture which has been absorbed. Ultraform® is not a hazardous material as defined in the German Ordinance on Hazardous Materials. If Ultraform® is processed properly little or no formaldehyde occurs in the region of the processing machine. Measures should be taken to ensure ventilation and venting of the work area, preferably by means of an extraction hood over the barrel unit. Ultraform® decomposes when subjected to excessive heat. The decomposition products formed in this case consist almost exclusively of formaldehyde, a gas which has a pungent smell even at very low concentrations and irritates the mucous membranes. Decomposition can rapidly result in the build-up of a high gas pressure in the barrel of the processing unit. If the die is sealed there may be a sudden release of pressure via the filling hopper. Contamination of Ultraform® by thermoplastics that cause ecomposition of polyacetals, e.g. PVC or plastics containing halogenated fire protection agents, must be avoided under all circumstances. Even small quantities can cause uncontrolled and rapid decomposition of Ultraform® during processing. Pellets and finished parts must not be allowed to come into contact with strong acids (especially concentrated hydrochloric acid) since they cause Ultraform® to decompose. | |
總體 | |
材料狀態 | 已商用:當前有效 |
資料 1 | Processing - Injection Molding Cooling Times (English)Technical Datasheet (English) |
UL 黃卡 2 | E41871-233594 |
搜索 UL 黃卡 | BASF CorporationUltraform® |
供貨地區 | 歐洲 |
性能特點 | 一般目的 |
用途 | 一般目的 |
機構評級 | EC 1907/2006 (REACH) |
形式 | 顆粒 |
加工方法 | 注射成型 |
樹脂ID (ISO 1043) | POM |
物理性能 | 額定值 | 單位制 | 測試方法 |
密度 | 1.40 | g/cm3 | ISO 1183 |
溶化體積流率(MVR) (190°C/2.16 kg) | 0.458 | in3/10min | ISO 1133 |
吸水率 | ISO 62 | ||
73°F, 24 hr | 0.80 | % | |
平衡, 73°F, 50% RH | 0.20 | % | |
硬度 | 額定值 | 單位制 | 測試方法 |
球壓硬度 (H 358/30) | 18900 | psi | ISO 2039-1 |
機械性能 | 額定值 | 單位制 | 測試方法 |
拉伸模量 | 355000 | psi | ISO 527-2 |
拉伸應力 (屈服) | 9140 | psi | ISO 527-2/50 |
拉伸應變 (屈服) | 13 | % | ISO 527-2/50 |
斷張率 | 33 | % | ISO 527-2/50 |
拉伸蠕變模量 3 (1000 hr) | 189000 | psi | ISO 899-1 |
沖擊性能 | 額定值 | 單位制 | 測試方法 |
簡支梁缺口沖擊強度 | ISO 179/1eA | ||
-22°F | 2.6 | ft·lb/in2 | |
73°F | 3.1 | ft·lb/in2 | |
簡支梁缺口沖擊強度 | ISO 179/1eU | ||
-22°F | 90 | ft·lb/in2 | |
73°F | 120 | ft·lb/in2 |
熱性能 | 額定值 | 單位制 | 測試方法 |
熱變形溫度 (264 psi, 未退火) | 212 | °F | ISO 75-2/A |
熔融溫度 | 333 | °F | ISO 11357-3 |
線形膨脹系數 - 流動 (73 到 131°F) | 0.000061 | in/in/°F | ISO 11359-2 |
Maximum Dynamic Service Temperature | 212 | °F |
電氣性能 | 額定值 | 單位制 | 測試方法 |
表面電阻率 | 1.0E+13 | ohm | IEC 60093 |
體積電阻率 | 1.0E+15 | ohm·cm | IEC 60093 |
相對電容率 (1 MHz) | 3.80 | IEC 60250 | |
耗散因數 (1 MHz) | 0.0050 | IEC 60250 | |
漏電起痕指數 (解決方案 A) | 600 | V | IEC 60112 |
可燃性 | 額定值 | 單位制 | 測試方法 |
UL 阻燃等級 (0.0630 in) | HB | UL 94 |
注射 | 額定值 | 單位制 | |
加工(熔體)溫度 | 374 到 446 | °F | |
模具溫度 | 140 到 212 | °F |
: 本公司可以免費提供 SGS MDS ROHS MSDS UL等認證
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
聚甲醛 C9021GV1/10 POM+10GF POM+10GF
C9021GV1/10 面議POM+20GF GA520 POM+玻纖 玻纖增強POM
GA520 面議POM FG2015 POM+玻纖 GF增強 POM+玻纖
FG2015 面議POM+26GF C9021GV1/30 POM+玻纖 POM+玻纖
C9021GV1/30 面議POM GA510 GF增強 日本旭化成 GA510
GA510 面議POM GN705玻纖增強 日本旭化成 POM+30GF
GN705 面議POM C9021AS抗靜電 美國泰科納 C9021AS
C9021AS 面議塑料機械網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
東莞市恒隆塑膠有限公司